一、目的（Purpose）

为了***地描述技术合作中所指的技术规格，通常需要由一整套文件予以表示。作为其中的一部分，本技术规格规定了摄像头模组应达到的特定技术规格，对于该型号货品具有约束力。

For a comprehensive description of technical cooperation referred to the technical specifications, usually a set of documents required by the express. As one part of the technical specifications of the  provides camera modules should meet the specific technical specifications for the goods model binding.

二、效力（Efficacity）

如果本规范与该类货品的通用技术规格书中的规格不一致时，以本规格书中的规定为准。

If the norms of such goods with a common technical specifications of the specification book is inconsistent to the specifications book shall prevail.

三、技术参数（Technical parameters）

四、功能检验标准 （Function inspection criteria）

（一）功能定义:

    1.摄像头模组电气性能、图像质量。(Electrical properties , the quality of image. )

（二） 检验方法:( Inspection methods)

1. 人员: 外观检查人员需经过培训并且辨色能力正常,其视力应达到1.0以上(矫正后达到1.0以上亦可),辨色能力应可通过标准测试。

Staff: The appearance of the inspectors to be trained and the capacity of normal color vision, Its vision to achieve more than 1.0 (after correction can also be reached more than 1.0), Color vision capability should be available through standard tests.

   2. 工具：连接电脑，用Amcap 测试软件检测图像。

     Tool: Connect the computer, Testing images with Amcap software.

3. 距离和时间: 观察距离为30 ~ 55cm,观察时间为每个面3 ~ 5秒。

Distance and Time: Observation distance: 30 ~ 55cm, 

Observation time for each surface: 3 ~ 5seconds

4. 检验环境: 外观检验应在不刺目的荧光灯下检查,其***照度应在100尺烛光亮度以上，或者是60W日光灯，1.5m距离下检验。

     Test condition: Visual inspection should be conducted under anti-glare fluorescent lamp with min 100 feet candela luminace, or under 60 watt fluorescent lamp of 1.5m distance.

（三） 接受标准 (Accept criteria)

1. 图像无花屏、彩屏、变色。(The image has no mess, color screen and discoloration.)

2. 无白点、黑点、脏污、暗角。(There is no white spot, black spot, dirt or dark angle in the image.)

3. 图像清晰，四周清晰度一致。(TThe image is same clear on all cornors)

五、外观检验标准  （Visual inspection criteria）

（一） 外观表面定义:( The appearance of the definition)

1． 摄像头模组的外观  (Camera module appearance)

（二） 检验方法:( Test methods)

1． 人员: 外观检查人员需经过培训并且辨色能力正常,其视力应达到1.0以上(矫正后达到1.0以上亦可),辨色能力应可通过标准测试。

Staff: The appearance of the inspectors to be trained and the capacity of normal color vision, Its vision to achieve more than 1.0 (after correction can also be reached more than 1.0), Color vision capability should be available through standard tests.

2． 距离和时间: 观察距离为30 ~ 40cm,观察时间为每个表面3 ~ 5秒。

Distance and Time: Observation distance: 30 ~ 40cm, 

Observation time for each surface: 3 ~ 5seconds

3. 检验环境: 外观检验应在不刺目的荧光灯下检查,其***照度应在100尺烛光亮度以上，或者是60W日光灯，1.5m距离下检验。

       Test condition: Visual inspection should be conducted under anti-glare fluorescent lamp with min 100 feet candela luminace, or under 60 watt fluorescent lamp of 1.5m distance.

4.观察角度: 观察角度在40° ~ 50°之间。

  Observation angle: Observation angle between 40° ~ 50°.

（三） 接受标准 (Accept criteria)

1． 清洁程度：部件必须无污点、无尘、无油脂及无其它污迹。由于运输材料造成的污迹如果能够吹去或抹去则是可以接受的。

The degree of Cleanliness : Components must not stain, clean, no grease and other stains. Because of s s stains caused by the transport of materials can  erased ， it is acceptable.

2． 装配表面：需装配的零部件应避免有划痕、凿痕、凹痕、弯折、破裂、压痕、擦伤或其它因不当装配所引起的缺陷。

       Assembly surface: Assembly of parts and components required to have scratches should be avoided, dent, bend, break down, Indentation, scratches or other improper assembly defects.

六、 可靠性测试 (Reliability Test)

七.包装要求(Packing Request)

1、产品应严格根据产品特点制定相应的包装标准并遵照执行，以保证产品规定使用和储存期内，达到防静电、防湿、防震、防霉、防野蛮装卸等标志及相关保质要求。

Products should be strictly in accordance with the characteristics of the development of the corresponding Product packaging standards and in compliance with the implementation, guarantee the use and storage of products during the period, reaching anti-static, moisture, shock-proof, mildew, anti-barbaric handling related signs and shelf-life requirements.

2、产品外包装上应标明：供方名称/标志、产品型号规格、内装数量、生产日期/批号和定单号。

      Product packaging should be marked: Supply-side name / logo, Product Model specifications, containing the number, production date / batch number and order number.

3、包装及装箱方案依据客户要求，由双方协商具体细节，以封样为准。

      Packaging and packing programs based on customer requirements, specific details of consultations by both parties, to finished products as the standard.